I have a few t-shirts left in sizes L, XL, 2XL, and 3XL. Get them before they are gone forever.
Archive for ‘Blog’
Thank you all for supporting Shiver Bureau! It was a huge success. We raised just over $13,000 with over 300 backers (had some issues with Kickstarter the last morning, so I took in some manual pledges). That is amazing! Thank you so much for making Shiver Bureau manifest its physical form. You’re the best!
The last couple days of the campaign I started doodling some self portraits of me and Kickstarter. Thought you would get a kick out of them.
I’ve been looking through my Shiver Bureau files and I ran across a story I didn’t even remember drawing. It is about 7 years old and it’s just been collecting dust on my hard drive. I never posted it online, I may have not even shown it to my wife.
I am going to be putting the 9 pages of it into the overloaded PDF as part of the Kickstarter. I am really looking forward to adding notes to all the old images and reliving the progression I’ve made as a storyteller. You can check out the kickstarter and get the Supersized PDF for only $10 bucks. It will have the entire first volume, which won’t be completed posting until some time next year on the website. It will also have b/w versions of all the pages. On top of all that it will have all the old art, old stories and whatever else I can find tossed in. Its going to be well over 300 pages of content. Back Shiver Bureau on Kickstarter!
Here is the first page of the story I found next to a current page. It is crazy to see the difference. Do you even recognize Pickle?
Oh yeah, here is one side of the bookmark that is going out with any Kickstarter pledge of $25 or more. No the actual bookmark will not be animated 🙂
The tricky part of Kickstarter is determining the funding goal. This is the method I used to arrive at my goal for Shiver Bureau which is running on Kickstarter now. There is no perfectly correct answer, but this can help to arrive at a decent best guess.
The basic equation is
Product cost + Shipping costs + KS/Xfer Fees
Step 1 – Determine production costs
Regardless of what you’re making, you need to know how much it will cost to make it. I will use graphic novels as the example because that’s what I know. We are going to print 2,000 books. Just an aside, if this is your first kickstarter, then printing 2000 books could be a bad idea. You need to look at your readership, similar projects, and marketing skills to determine appropriate print run. That is outside of the scope of this article. So back to printing 2,000 books. Using various sites like KA-BLAM, Lightning Source, RA Direct, Print Ninja and accessing their pricing calculators, we can get a pretty good idea of what 2,000 books will cost. Be careful when you price the books, some calculators include shipping and some don’t. Let’s say we decide to go with some random company called BookPrint and it will cost around $10/book. This includes shipping.
So our total production cost is 2000 books x $10 = $20,000.
Step 2 – Determine shipping costs
This cost is a little more elusive. The first part in figuring this out is by looking at your production costs, finding projects in same category and determining how many backers it took to raise that much. If we find other projects on KS that have raised $20,000 or more we will see something like this…
Project A raised $26,000 with 600 backers. ~$43/backer
Project B raised $38,000 with 900 backers. ~$42/backer
Project C raised $31,000 with 300 backers. ~$100/backer
Project D raised $25,000 with 600 backers. ~$41/backer
With the exception of Project C, a project is averaging around $42/backer. Project C actually brings up a very important note. Project C is a project to print the 3rd volume of a very popular webcomic. It has a huge builtin fan base and it also has the ability to sell book bundles. Book bundles are basically including all 3 books in a single reward tier. Book bundles are huge incentives for backers. So we are going to pretend this is our first graphic novel and our first kickstarter, so we will ignore project C because it isn’t in our same category. This research method can also be used to determine how many books you should try to print. How many backers do you think you can get compared to other projects on Kickstarter? That will give you an idea about how many books to print.
Okay, so now divide our production costs by our backer average, $20,000 / $42 = 476 backers. We’re not done yet, we have to figure out shipping costs to all these wonderful people. We figure that shipping costs (delivery costs plus buying all the tape, packages, tape, labels, printer ink, etc) is going to be about $7 per backer. Again this will require some research on UPS, Fedex, packaging suppliers, etc.
Shipping cost is 476 backers x $7 = 3332, let’s just say $3500. Of course our new total is now 20,000 + 3500, which means we need more backers, which means it will cost more to ship. This is an endless cycle and we will never reach the end. So what do we do? Nothing, the shipping costs will be baked into every reward tier. So that will offset the uncertainty. Remember this cost is elusive. Also, high level rewards will help to offset some of these costs, not everyone will pick the minimum. Also some people may pick a digital only reward which requires no shipping. But just to be safe, lets make $3500 into $4000.
Step 3 – Determine Kickstarter Fees
This part is easy, just add on another 10% (check the Kickstarter site before you run your campaign to make sure this is still the correct %) buffer to your total cost thus far. You just have to make sure you do the math correctly. Our total right now is
20,000 + 4000 = 24000
The incorrect math is 24,000 + 10%. This will put the total at 26400. If you subtract 10% from 26,400, you will get 23,760. That’s lower then our 24,000 goal. We could just make up some number and most likely be okay, say 27,000.
But for all you math heads out there, the correct formula to determine the amount you need is
Cost / (1 – (KS fee /100)
24000 / (1 – (10 /100) => 24000 / (1 – (.1) => 24000 / .9 = 26666.66
I think we’d end up calling this 27,000. So our guess above was correct.
This should get your pretty close to something reasonable. Every kickstarter is different and will require you figure out your own specific costs. For example, say you want to create shirts. You have to add that to the production and shipping costs. The more rewards you add, the more complex and error prone your goal could get. It could be a good idea to keep things simple for your first kickstarter and keep the amount of knick-knacks to a low or nonexistent amount. This means you wont be able to raise as much money, but the stress level and pitfalls will be a little more contained.
I wish you the best of luck with your project and I’d love to hear your thoughts on this method…especially if I screwed up any of the numbers. Dammit Jim, I’m an artist, not a mathematician. Same thing with grammar. I’m a writer, not an editor!
Just wanted to let you know I did to fun interviews recently.
They are both pretty interesting and don’t cover much of the same ground. Also there is only short 14 days left for the Kickstarter. Don’t miss your chance to get a printed copy of Shiver Bureau. I can’t guarantee at this point that there will be any extra copies.
Wanted to try animating one of the scenes from Shiver Bureau. It was one of my favorite scenes and I think the animation came out pretty decent. It took about 2 hours total and I did it with a Photoshop CS4. Animating in PS isn’t the easiest thing to do. So things are super easy and quick, but others are just downright impossible. Still it was a good learning experience. The more I mess around with animation, the more I want to master it.
Also the Kickstarter only has 18 days. Don’t miss your chance to get a printed copy of Shiver Bureau. KICK ME!
Hey look who wrote an article for Bleeding Cool…okay, I know a lot of people have but now so have I. The article is called “Full Time Jobs vs. Comics”. It gives some insight into my process to stay motivated and productive. It also happens to mention my Kickstarter which, if you didn’t know, is running right now. Don’t miss your chance to get Shiver Bureau in print!
Have you ever wanted a print copy of Shiver Bureau? Well now is your chance. Besides the book you can also get sketches, shirts, comissions, original pages and the cover art.
I really can’t say it enough. Thank you to all my readers for supporting this comic.
Well, I’ve just updated WordPress for the first time in 4 or 5 years. Amazingly it looks like nothing broke. Can you believe it? The reason I finally updated was because my spam blocker no longer worked with my version. So if you had been trying to post comments on the site, it has been broken. Sorry about that. There will forever be an empty place in my heart that should have been full of your comments. Oh well.
Second piece of bizness. Shiver Bureau’s Kickstarter is finally going live…on Monday. I know, tease, but at least it will give you something to look forward to. I will post here when it is up and ready to go. Or you can join the Facebook event at this link https://www.facebook.com/events/423264604530366/
And finally for some art, this is what the book will look like more or less.
I am taking over Two Guys and Guy this week. It is a continuation/ending of a story arc I did a few months back.
You can read the first three strips here
and you can read this first strip of the ending here
The final two pages will post on Wednesday and Friday. If you haven’t read TwoGAG (and I am sure you have) then you should check it out. Doesn’t get much better.